Laminating Film	Heat-Shoe	Hot-Roller (Rubber)	Metal Cylinder (Matrix)
OPP 1.2 mil Gloss & Matte Reg Adhesive	110-120C (230-250F) @ 5-6 mtr/16-20’ per min	110-120C (230-250F) @ 2 mtr/6.5’ per min	100-105C (212-221F) @ 4-5 mtr/13-17’ per min
OPP 1.4 mil Soft Tch Regular Adhesive	110-120C (230-250F) @ 5-6 mtr/16-20’ per min	110-120C (230-250F) @ 2 mtr/6.5’ per min	100-105C (212-221F)@ 4-5 mtr/13-17’ per min
OPP 1.4 mil Soft Tch Digistick Adhesive	110-120C (230-250F) @ 4.5-5 mtr/14-17’ per min	115-125C (239-257F) @ 2 mtr/6.5’ per min	105-110C (221-230F) @ 4 mtr/13’ per min
OPP 1.8 mil Gloss & Matte SuperStick	110-120C (230-250F) @ 4.5-5 mtr/14-17’ per min	115-125C (239-257F) @ 2 mtr/6.5’ per min	105-110C (221-230F) @ 4 mtr/13’ per min
NYLON 1.1 mil BXT Regular Adhesive	140-145C (284-293F) @ 5-6 mtr/16-20’ per min	T120-130C (248-266F) @ 4-5 mtr/13-17’ per min	T120-130C (248-266F) @ 4-5 mtr/13-17’ per min
NYLON 1.1 mil BXT SuperStick Adhesive	140-145C (284-293F) @ 4.5-5 mtr/14-17’ per min	140-145C (284-293F) @ 2 mtr/6.5’ per min	120-130C (248-266F)@ 4-5 mtr/13-17’ per min

**These are guidelines only and are intended to demonstrate the difference in temperature and speed settings associated with the various laminator technologies, laminating base films and adhesive types. Individual laminator makes and models will vary. Customers should test the laminated output and adjust temperature and speeds as necessary prior to running full production.