MOHR 3-Side Trimmer BC 330

MOHR 3-Side Trimmer BC 330

Mohr 80 (31.5") Paper Cutter

MOHR cutting machines (in the graphics industry also known as guillotine or paper cutter) are durable, programmable cutters with hydraulic drive units.

Both, the company and the operator value not only the uncomplicated operation, but also the long service life of the cutting machine. The unique cutting precision is obtained by a sturdy construction and direct measurement system.

Cutting machine MOHR 80 (31.5") ECO:

The machine is operated via an ergonomically arranged control panel with 5.5" monochrome display and extra low-profile keyboard. Repeat sequences can be saved in one of 198 available memory positions and even be adapted at any time.

Cutting machine MOHR 80 (31.5") PLUS:

Operation via 18.5" touch-screen display. There are 1998 memory positions available for repeat cut sequences. Due to digital workflow integration Compucut® takes the cutting data supplied as ppf or jdf files direct from the prepress stage.

To automatically start available stored cutting programs, the machine is furnished with a bar-code reader. This allows setup times to be reduced to almost zero. The process visualization gives the operator a graphic indication of the material handling. This minimizes the proneness to errors considerably.

 

 

In stock
SKU
Mohr 80
Grouped product items
Product Name Qty
Mohr 80 PLUS
CA$44,495.00
Mohr 80 ECO
CA$39,995.00

Cutter MOHR 80 (31.5") ECO

Sturdy, programmable cutter with hydraulic drive and 5,5“ monochrome display.

Customer benefits

• Extensive programming options with a memory capacity of 198 programs

• Easy knife change with automatic interruption in the lower dead end and knife fine adjustment from the front

• Machine frame with optimized stability for optimum absorption of cutting forces and greatest cutting accuracy

• Minimal maintenance requirements due to the use of novel materials

Description of the machine

The cutter MOHR 80 is designed for one-shift operation. The precise and gentle swing cut is carried out hydraulically. Thus, the time of the knife spent in the lower dead end can be adapted to the material. The ultra-smooth stainless table surface equipped with air jets allows an easy handling of the material. Within a wide setting range the clamping pressure can be adjusted infinitely to each cutting material by means of a turning knob with scale. Bright LEDs mark the cutting line clearly visible for the operator. The operation of the machine is done via an ergonomically positioned control panel with 5.5’’ monochrome display and additional membrane keypad. Recurring cutting sequences can be memorized (memory capacity 198 programs) and adapted at any time. The creation of the cutting programs is done either manually or menu-driven and intuitively via block programming. To optimize the cutting quality the pre-clamping time can be adjusted according to the material.

Technical data

Cutting width 800 mm | 31.50 in

Feeding depth 800 mm | 31.50 in

Feeding height max. 100 mm| 3.94 in

Clamp pressure min. 180 daN | 397 lbs

Clamp pressure max. 2,700 daN | 5,952 lbs

Backgauge speed on return way (0 - ...) 130 mm/sec | 5.12 in/sec

Smallest cut, automatically, without false plate 15 mm | 0.59 in

Smallest cut, automatically, with false plate 50 mm | 1.97 in

Dimensions (w × d × h) 1,500 × 1,970 × 1,500 mm | 61.02 × 77.56 × 59.06 in

Weight 900 kg | 1,984 lbs

 

Cutter MOHR 80 (31.5") PLUS

Sturdy, programmable cutter for integration into the digital workflow with 18.5” touch-screen display, barcode reader, Compucut® and process visualization.

Customer benefits

• Barcode reader for automatic cutting program creation and loading of the assigned program via Compucut®

• Process visualization for the graphical display of the material handling to minimize the risk of errors

• Machine frame with optimized stability for optimum absorption of cutting forces and greatest cutting accuracy

• Minimal maintenance requirements due to the use of novel materials

Description of the machine

The cutter MOHR 80 is designed for one-shift operation. The precise and gentle swing cut is carried out hydraulically. Thus, the time of the knife spent in the lower dead end can be adapted to the material. The ultra-smooth stainless table surface equipped with air jets allows an easy handling of the material. Within a wide setting range the clamping pressure can be adjusted infinitely to each cutting material by means of a turning knob with scale. Bright LEDs mark the cutting line clearly visible for the operator. The operation of the machine is done via an ergonomically positioned 18.5’’ touch-screen display. Recurring cutting sequences can be memorized (memory capacity 1,998 programs) and adapted at any time. Integrated in the digital workflow the cutting data is taken over directly from pre-press into Compucut® as ppf- or jdf-file. Then Compucut® generates automatically the cutting program. To start the cutting program automatically the machine is equipped with a barcode reader. Hence, the setup time can be reduced to nearly zero. With the process visualization the handling of the material is displayed graphically and so the risk of errors significantly downsized. To optimize the cutting quality the pre-clamping time can be adjusted according to the material.

Technical data

Cutting width 800 mm | 31.50 in

Feeding depth 800 mm | 31.50 in

Feeding height max. 100 mm| 3.94 in

Clamp pressure min. 180 daN | 397 lbs

Clamp pressure max. 2,700 daN | 5,952 lbs

Backgauge speed on return way (0 - ...) 130 mm/sec | 5.12 in/sec

Smallest cut, automatically, without false plate 15 mm | 0.59 in

Smallest cut, automatically, with false plate 50 mm | 1.97 in

Dimensions (w × d × h) 1,500 × 1,970 × 1,500 mm | 61.02 × 77.56 × 59.06 in

Weight 900 kg | 1,984 lbs

More Information
Custom Stock Status Ships 7-10 days
Write Your Own Review
You're reviewing:Mohr 80 (31.5") Paper Cutter
Customer Questions
No Questions
Did you find what you were looking for?